加工定制:是 | 品牌:天通 | 型号:TT-CL1000 |
规格:定制 |
济宁天通污水处理设备工艺详解:
(1) 格 栅:用于***后续管路的畅通,拦截污水中的颗粒和纤维状的物质。所拦截的栅渣期由人工清除。格栅采用粗细两道,置于调节池进水口。
(2)污水调节池:用于调节水量和均匀水质,使污水能比较均匀进入后续处理单元。污水池内设置潜污泵,用以将污水提升送至后续处理单元。
(3)一体化设备:作用:生化过程,利用微生物去除污水中的有机物。采用厌氧反应池,在厌氧条件下回流污泥与进水充分混合,聚磷菌在此释放磷并同时吸收环境中的低分子酸,以PHB的形式储存起来,在好氧环境中,聚磷菌大量吸收磷,达到除磷的目的。采用生物接触氧化池,池内高的溶解氧和优良的生物菌群与有机污染物接触反应,为有机污染物的降除,氨氮的氧化和磷的吸收去除创造了最适应环境,提高了有机污染物及氨氮、磷的去除效率。二沉池主要为满足接触反应池随水流出的脱落生物膜,游离菌胶团,有机杂质等的沉降,为达到满意的沉降效果,采用设计合理的表面负荷,沉降速度,污泥斗倾角,避免死角,缩短污泥在池内停留时间,***澄清效果和泥水分离效果。
(4)过滤罐:污水经集水池泵入过滤罐,通过过滤罐内活性炭的过滤、吸附作用进一步去除水中的污染物。
(5)消毒装置:消毒方式采用接触式二氧化氯消毒,***杀灭各种病菌。
(6)污泥消化池:生化后所沉淀剩余污泥在池中进行好氧消化稳定处理,以减少污泥的体积和提高污泥的稳定性。好氧消化后的污泥量较少,定期联系由环卫部门抽泥车清除外运或进行污泥脱水处理外运。上清液采用上清液回流至调节池。
它具有较高的生物浓度和较高的有机负荷。曝气生物滤池采用粗糙和多孔球形过滤器,提供微生物生长的良好环境,容易成膜,运行稳定,可以保持在过滤材料和过滤材料表面的微生物生物量,单位体积远大于活性污泥法中的微生物数量(10 ~ 15g/L),高生物量浓度的曝气生物滤池的负荷增大,减少了池体积和面积、大建设成本较低的。
在济宁天通全体员工的不懈努力下,通过良好的施工管理,完善的售后服务赢得了客户的信赖。公司始终坚持“信誉就是生命”的经营原则,始终把质量和安全放在首位,处处为客户着想,确保每一个项目都能及时完成,并顺利通过验收,赢得了***的良***,得到了客户的认可。
Integrated equipment: function: biochemical process, the use of microbes to remove the organic matter in the sewage. The anaerobic reactor was used to fully recycle the sludge and the influent under anaerobic condition. The phosphorus release bacteria were released from the sludge and the low molecular acids were absorbed in the environment, and stored in the form of PHB. In aerobic environment, phosphorus accumulating organisms absorb phosphorus and achieve the purpose of phosphorus removal. By biological contact oxidation, dissolved oxygen pool and high biological flora and excellent organic pollutants contact reaction, the organic pollutant removal and ammonia oxidation reduction, the absorption of phosphorus removal has created the most adapt to the environment, improve the removal efficiency of organic pollutants and ammonia nitrogen and phosphorus. Two sink the pond to meet the contact reaction tank off biofilm with water, free zoogloea, settlement of organic impurities, to achieve satisfactory effect of settlement, the surface load, the rational design of the settling velocity of sludge bucket angle, to avoid the dead, shorten the sludge retention time in the pool, and ensure the clarification effect the mud water separation effect.