加工定制:是 | 品牌:天通 | 型号:TT-CL1000 |
规格:定制 |
福建地埋式污水处理设备
济宁天通污水处理设备,污水处理系列:气浮机、刮泥机、格栅除污机、带式压滤机、真空过滤机、垃圾焚烧炉、烟尘处理设备、生活污水处理设备、地埋式污水处理设备、涡凹气浮机、溶气气浮机,微滤机、一体化净水设备、无动力过滤器、机械过滤器、污泥脱水机、高效澄清池、中心传动、周边传动刮吸泥机、行车式刮泥机、厌氧反应器、氨氮吹脱塔、芬顿反应器、生物瀑气滤池、曝气机、生物填料等。
工业废水的有效处理应遵循以下原则:
1,最根本的是要改革生产过程,尽量***生产有毒有害废水。在有毒物质或产品的情况下,有毒物质或产品被***材料或产品取代。
2,在使用有毒原料及有毒中间产品及产品的生产过程中,应采取合理的工艺和设备,严格操作和监督,***渗漏,减少损失。
3,含有高毒性物质的废水,如重金属、放射性物质、高浓度酚和氰,应从其他废水中分流,以利于对有用物质的处理和回收。
4,一些大流量、轻污染的废水如冷却水不能排入下水道,以免增加城市污水处理厂和污水处理厂的负荷。这种废水经过适当处理后应在工厂循环利用。
济宁天通地埋式污水处理设备优势:
1,采用成熟的A/O生化处理工艺,具有较好的去除有机物和较好的脱氮功能,达到排放标准要求,具有较好的冲击负荷能力,能适应水质和水量变化的特点。
2,该工艺采用预脱氮,因为污水中的有机污染物在反硝化过程中与碳源反应,大大降低了有机物的含量,降低了生化处理后有机物的浓度。
3,采用新型包装,胶片快速,使用寿命长,处理快捷。
4,充分考虑二次污染的可能性,并将其影响降到***程度。
5,采用集中控制和自动操作,易于管理和维护,提高了系统的可靠性和稳定性。
6,系统的处理设施均设置在地表以下,而不是表面积,既可用于绿化,又有利于防冻。
造纸废水、制糖废水、食品加工废水等有机废水可与城市污水系统有机物相结合。大型污水处理厂应建立,包括简单可行的处理设施,如生物氧化塘,污水土地处理系统建立仓库,根据当地的条件。与小型污水处理厂相比,大型污水处理厂可大大减少基建和运行费用,水质和水质稳定,易于保持良好的运行和处理效果。
一些可降解的有毒废水如苯酚废水,经工厂加工后,按允许排放标准排入城市下水道、污水处理厂进行进一步的生物降解的含难生物降解有毒污染物的废水,不应排入城市下水道和输送到污水处理厂,应分别处理。
Jining day sewage treatment equipment, sewage treatment, flotation machine, scraper, grille decontamination machine, belt filter, vacuum filter, waste incineration furnace, smoke processing equipment, living facilities, buried sewage treatment equipment, cavitation air flotation machine, dissolved air flotation machine wastewater, microfiltration machine, integration water purification equipment, power filter, mechanical filter, sludge dewatering machine, high-efficiency clarifier and transmission center, peripheral driving scrapers, driving mud scraper machine, anaerobic reactor, ammonia stripping tower, Fenton reactor, biological aeration filter, aerator, biological filler etc..
The following principles should be followed for the effective treatment of industrial wastewater:
1, the most fundamental is to reform the process of production, as far as possible to eliminate the production of toxic and harmful wastewater. In the case of toxic substances or products, toxic substances or products are replaced by non-toxic materials or products.
2, in the production process of toxic materials and toxic intermediate products and products, reasonable process and equipment should be adopted, strictly operated and supervised, so as to eliminate leakage and reduce losses.
3, wastewater containing highly toxic substances, such as heavy metals, radioactive substances, high concentrations of phenol and cyanide, should be diverted from other wastewater, so as to facilitate the treatment and recovery of useful substances.
4, some large, light polluted water, such as cooling water, can not be discharged into the sewer, so as not to increase the load of the municipal sewage treatment plant and the sewage treatment plant. This waste water should be recycled in the factory after proper treatment.